Easy sensor removal with hex key • Pre-installed Sensors · Supplied with pre-installed pH/ORP, EC/Turbidity and DO sensors • Quick Sensor Replacement · Sensor replacement is quick and easy with field replaceable, screw type connectors and color coded bodies. • Auto-Sensor Recognition · This meter automatically recognizes sensors. • Temperature Sensor · The probe incorporates a temperature sensor for temperature compensation of all parameters. · Accurate temperature reading in degrees Celsius, Fahrenheit and kelvin are displayed. • Field Ready · For field calibration, our quick calibration solution allows standardization of pH and conductivity with one calibration solution. • Quick Calibration · Simply screw the calibration beaker filled with Quick Calibration solution onto the probe, select “Quick calibration” from the menu and press OK. Individual calibration may also be performed using multiple calibration points. Multiparameter Probe and Sensors * Reduced for ISE sensors Specifications HI7698294 Supported Configuration Connector 1 pH, pH/ORP, ammonium ISE, chloride ISE, nitrate ISE Connector 2 dissolved oxygen Connector 3 EC, EC/turbidity Temperature sensor built-in Operating Temperature −5.0 to 50.0 °C, 23.0 to 122.0 °F* Storage Temperature −20.0 to 70.0 °C, −4.0 to 158.0 °F* Maximum Depth 20 m (66’)* Cable Specification multistrand-multiconductor shielded cable with internal strength member rated for 68 kg (150 lb.) intermittent use Wetted Materials body: ABS; threads: nylon; shield: ABS/316 SS; temperature probe: 316 SS; O-rings: EPDM Sample Environment fresh, brackish, seawater Waterproof Protection IP68 Dimensions (without cable) 342 mm (13.5”), dia=46 mm (1.8”) Weight (with batteries and sensors) 570 g (20.1 oz.) 7 Multiparameter 7.48 | www.hannainst.com portable
RkJQdWJsaXNoZXIy MTI3NTM=